Yes its not quite over yet so we shouldn’t ignore the weather; cold, wet and or windy let’s stay safe out there! This advice works for sporting events too!!
Reblogged with thanks from EHS Today
Table of Contents:
- Winter Safety from Head to Toe
Santa Claus is the ultimate winter warrior. He comes like clockwork, every year, working a grueling 24-hour shift so that all the little boys and girls receive presents (or coal).
Santa is prepared for the cold weather. This fictional character almost seems to have PPE down to a tee: hat, gloves, waterproof boots and layered clothing.
However, unlike Santa, outdoor workers typically work year-round, rain, sleet, snow or shine with a similarly hectic schedule. So, an employer must take the time to prepare and educate workers about exposure to colder temperatures to avoid injuries and illnesses.
A 2014 study from the National Center from Health Statistics, examined weather-related mortality rates between 2006-2010. It showed that more than two-thirds of deaths in the United States were attributed to excessive cold, compared to one-third of heat-related deaths.
Workers or those with preexisting chronic conditions – including cardiovascular and respiratory diseases, conditions that impair thermoregulatory function and those taking various medications – are more susceptible to cold effects, the NCHS study stated.
For outdoor workers, cold stress, hypothermia, frostbite, trench foot, and chilblains are the most common ailments. However, with the proper protection and training, winter-related injuries are preventable.
The First Step
As with all safety measures, the first step to protecting workers from winter conditions is a job hazard analysis (JHA), says Joe Corvello, corporate director of health and safety at American Bridge Co., a 2016 America’s Safest Companies winner.
Assessments should be based on geographic location, type of work environment and duration of work activity exposed to the elements.
Next, the safety leader should perform a PPE assessment to meet the requirements identified in the risk assessment or JHA.
The safety leader also should identify training requirements to educate workers on cold weather working, the risks and hazards associated with that working environment and the PPE required to protect them from the elements and hazards associated with the work activity, Corvello says.
Donald Garvey, construction technical specialist at 3M, says both workers and supervisors should be trained on the following:
- Hazards of cold work.
- The initial signs and symptoms of cold stress.
- Basic first aid for cold stress – especially frost bite and hypothermia.
- The use of a buddy system to monitor each other.
- Eating and drinking habits on the job and after work and the need to rehydrate.
- Sweating which is a cooling mechanism for the body.
- Medication and other susceptibility factors which could cause cold sensitivity.
- Clothing – keep it loose, dry and layered.
Once all of the above assessments have been completed, a cold weather working plan specific to the project location and environment can be completed, Corvello says. Additional information in a cold weather plan will cover winterization of equipment, protection of permanent materials in place, snow removal and monitoring/surveillance.
“Having a good winter working plan in place to identify snow removal, gritting and temperature work restriction demonstrates a company’s commitment to keeping workers safe,” he says.
Even though it may seem like common knowledge to bundle up in cold weather, some workers have not experienced longer exposure to winter conditions or are not conditioned, which could present a hazard if they underestimate Mother Nature. Appropriate PPE exists for all extremities and should be utilized as temperatures drop.
One thing is certain: workers should be protected from head to toe. Starting from the top, a head covering is essential. Specially-designed liners and coverings can work with helmets and hard hats to provide protection in the cold, says Jason Lindula, safety coordinator at Egan Co., a 2014 America’s Safest Companies recipient.
A worker’s eyes must remain protected 100 percent of the time to prevent snow blindness and damage from UV rays.
“Typically during winter weather, high winds and sun glare are the most risk to eyes,” Corvello says. “Polarized, foamed-sealed safety glasses with anti-fog provide the best protection from wind chill, debris and sun glare.”
Snow blindness, a condition in which UV rays essentially sunburn the cornea, can be a hazard in winter environments, especially when working at higher elevations, Garvey says. While it is called snow blindness, snow is not required for it to occur. Water or any reflective surface can create the same hazard.
“Even on cloudy days, eye protection should still be worn, as UV radiation may still penetrate the cloud cover,” he warns.
A multi-layering approach to clothing is crucial to protecting workers during hazardous, ever-changing winter weather conditions.
“With all three layers it is nice to have zipper openings,” Garvey suggests. “This allows venting of sweat and customizing the insulation properties to the specific environment to minimize sweating.”
Because weather conditions can change throughout the day, employees can remove or adjust layers. In addition, each layer has a specific purpose. Garvey specifies:
Layer 1 (closest to the skin) – A polypropylene or similar wicking material. This helps draw sweat away from the body to keep the skin dry.
Layer 2 (middle layer) – An insulating layer of wool or polar fleece-type materials. This provides insulation even when wet. Cotton should not be used as the insulating layer as it quickly loses its insulation properties when wet.
Layer 3 (outer layer) – A nylon or similar material to block the wind.
Winter layers can be bulky, but don’t wear loose clothing that could get caught in machinery, Corvello says. Workers should bring dry clothes to work to change if clothing gets wet, and regular PPE such as safety vest should still be worn over winter items.
Just as with eyewear, companies should require workers to wear gloves at all times. Gloves for winter work should still be task-specific, such as cut-resistant, while also providing insulation and dexterity, Lindula says.
The use of glove liners can be used with cut-resistant or chemical gloves, Corvello suggests.
For outdoor workers, studded overshoes with waterproof properties can provide insulation as well as traction on ice and snow to prevent slips, trips and falls, Lindula says. Shoe/boot coverings with studs also are available.
Shifting Work Indoors
Finally, if conditions prove to be too hazardous, outdoor work should be moved to a different day, depending on the weather forecast and the availability of indoor job tasks.
“Ideally, we like to be inside but we know that’s not always the case. Just because the news says one thing, your location may be different,” Lindula says. “If we don’t think it’s safe to be outside working, we find interior work and put outdoor work off for another day.”
Company policies or guidelines should be addressed prior to the start of the winter season. For Egan Co., if the wind chill hits a certain threshold at 6 a.m., employees are not required to come in unless there is interior work that safely can be done. If temperatures rise throughout the day, workers could be asked to come in at a later time. If hazardous conditions arise later in the day, this is addressed as well.
“Our jobsites will shut down early so employees can go home and don’t have to travel in conditions that may not be the best,” Lindula says.